Enclosed Clamps

Enclosed CNOMO Clamps

Enclosed NAAMS Clamps

Heavy Duty Clamps

Hook Pins

Laser Welding Clamps

Light Weight Clamps

Manual Clamps

Open Clamps

Pin Packages

Straight Action Clamps

Two Arm Clamps

Underbody Clamps

52H - Manual Automotive Clamps

Application: Clamping, holding, gripping and accurately positioning of metal sheets and other parts in jigs and handling systems.

1. inductive sensing module with LED display
2. toggle action mechanism
3. centring pin diameters between 20 mm and 45 mm
4. manual actuation and single-sided clamping hook

81R32 - Automation Power Clamp, Lightweight Design

Application: Clamping, holding, gripping and positioning of metal sheets and other parts in jigs and handling systems.

1. integrated end position sensing system with LED display
2. toggle action mechanism
3. two mounting areas (front and rear)
4. clamping arm in horizontal or vertical clamping position

82A5 - Cam Type Clamp

Applications Clamping, holding, gripping and positioning of metal sheets and other parts, mainly in Laser-welding gigs.

1. Different clamping positions possible
2. Cam-type mechanism
3. Inductive sensing module with LED display
4. Clamping force availabele over a wider range

82D - Double Arm Enclosed Automation Power Clamps

Application: Clamping, holding, gripping and positioning of metal sheets and other parts, mainly in jigs and handling systems.

1. high accuracy of positioning due to internal holding arm
2. 2 lateral and 1 front mounting areas
3. integrated inductive sensing module with LED display
4. cylinder diameter 40 mm or 64 mm

82E - Automation Power Clamps, Narrow Design

Application: Clamping, holding, gripping and positioning of metal sheets and other parts, mainly in jigs and handling systems.

1. two mounting areas (front and back)
2. toggle action mechanism
3. covered clamping mechanism
4. weld immune sensing switches

82G80-4 - Heavy Duty Pneumatic Clamp, Fully Enclosed Design

Application: Clamping, holding, gripping and positioning of metal sheets and other parts, mainly in jigs and handling systems for high clamping and holding forces.

1. inductive sensing module with LED display
2. toggle action mechanism
3. manual unlocking in case of pressure drop
4. mounting areas at front, back and sides

82M - Heavy Duty Pneumatic Clamp, Modular Design

Application: Clamping, holding, gripping and positioning of metal sheets and other parts, mainly in jigs and handling systems. Your best choice for carefully inserting and clamping components are the clamps with a handle lever.

1. inductive sensing module with LED display
2. toggle action mechanism
3. adjustable opening angle without need for accessory parts
4. wide range of clamping arm variants

82P - Pin Clamps, Pneumatic Drive

Application: Clamping, holding, gripping and accurately positioning of metal sheets and other parts in jigs and handling systems.

1. inductive sensing module with LED display
2. toggle action mechanism
3. centring pin diameters between 20 mm and 45 mm
4. single-sided or double-sided clamping hook

82U - Pallet Clamps

Application: Clamping, holding, gripping and positioning of metal sheets and other parts, mainly in jigs and handling systems, particularly in situations where local accessibility does not allow the use of standard clamps.

1. hard alloy rest at the clamping hook
2. toggle action mechanism
3. inductive sensing module with LED display
4. sensing system integrated or attached to the cylinder

85P5 - Automotive Straight Line Action Clamp, Enclosed De

Application: in jigs where a locked pin package is needed. This part also can be used as a straight action clamp.

1. Toggle locking in extracted position
2. Stroke 40 mm
3. Different mounting areas
4. Integrated sensing module

C - Wedge Pneumatic Clamp - Cnomo Series

Range of three clamps. Total stroke 105� and torque varying from 40 to 200Nm

1. CNOMO norm standard
2. Locked in clamped position in case of air failure
3. Integrated inductif sensor
4. Suit for industrial applications especially in welding or machining environment

PMS - Hook Pin Clamp - Cnomo Series

Range of hook pin used to center a part and then to clamp it. Eight models available. Pin diameter varying from 15.8 to 29.8mm. Able to clamp parts up to 5 mm thickness

1. CNOMO norm standard
2. Sequential motion to center the part before to clamp it
3. Locked in clamped position in case of air failure
4. Suit for industrial applications especially in welding or machining environment

PP - Pin Package, Cnomo Series

Range of pin package stroke 25 or 50mm. Use to adapt a pin to center parts

1. CNOMO norm standard
2. Maintained in open or close position in case of air failure
3. Optional shielded case to protect the mechanism
4. Suit for industrial applications especially in welding or machining environment