 |
|
|
DCA-CCP - Control Capacitor
A Control Capacitor can be used along with the drive motor to facilitate motor start up.
|
|
|
DCA-CFC - Control Frequency Converter
A Control Frequency Converter can be used to adjust the speed of an AC conveyor motor.
|
|
|
DCA-CMS - Control Motor Switch
The Motor Control Switch is used to turn power on and off to the motor.
|
|
|
DCA-CPS - Control Power Supply
The Control Power Supply is required on L1 series conveyors to convert AC power to DC to run the DC motor.
|
|
|
DCA-CSB - Sensor Bracket
Sensor Brackets mount to the chassis and allow the mounting of sensors.
|
|
|
DCA-CSI - Sensor
Sensors can detect product and pallets as they pass along the conveyor.
|
|
|
DCA-CST - Sensor Target
The Sensor Target Bracket can be used to hold photoelectric sensors and targets for detecting product on the conveyor.
|
Product |
Sensor Dia |
Vertical Adjustment |
Use With Conveyor |
mm |
|
mm |
in |
DCM- |
|
DCA-LM1-000-CST-18 |
m18 |
|
25 |
0.98 |
L1, M1 |
|
|
|
DCA-FCS - Floor Stand, Conveyor
Conveyor
Floor Stands provide a solid, adjustable base for conveyor modules.
Floor stands are orders in customer specified heights measured from the
floor to the conveyor surface.
|
Product |
Chassis Width Max |
Height Max. |
Use With Conveyor |
mm |
in |
mm |
in |
DCM- |
|
DCA-H1-800-FCS-XXXX-01 |
800 |
31.5 |
1500 |
59.06 |
L1, M1, H1 |
|
DCA-H1-800-FCS-XXXX-02 |
800 |
31.5 |
1500 |
59.06 |
L1, M1, H1 |
|
DCA-L1-140-FCS-XXXX-01 |
140 |
5.5118110236 |
1000 |
39.37 |
L1, M1 |
|
DCA-L1-140-FCS-XXXX-02 |
140 |
5.5118110236 |
1000 |
39.37 |
L1, M1 |
|
DCA-M1-250-FCS-XXXX-01 |
250 |
9.84 |
1250 |
49.21 |
L1, M1, H1 |
|
DCA-M1-250-FCS-XXXX-02 |
250 |
9.84 |
1250 |
49.21 |
L1, M1, H1 |
|
|
|
DCA-FRS - Floor Stand, TRR
The
Floor Stand provides a solid adjustable base for TRR modules. Floor
stands are ordered in customer specified heights measured from the
floor to the conveyor surface.
|
|
|
DCA-GLA - Guide, Lateral, Adjustable, Plastic
Adjustable
Lateral Plastic Guides allow for the guide position to be changed
allowing quick changeover for different sized parts.
|
|
|
DCA-GLB - Guide Brush, Lateral, Fixed, Aluminum
The
Lateral Guide Brush can be inserted in a slot within the lateral guide.
It prevents particulate from migrating to the side of the conveyor.
|
|
|
DCA-GLC - Guide Clamp, Lateral, Fixed, Aluminum
The Lateral Guide Clamp mounts the fixed lateral guide.
|
|
|
DCA-GLF - Guide, Lateral, Fixed, Plastic
Fixed
Lateral Guides mount in a slot on top of the chassis. They are used to
contain the product on the conveyor but do not provide accurate lateral
product positioning. The can be added after a conveyor is assembled
|
Product |
Length |
Height |
Use With Conveyor |
mm |
in |
mm |
in |
DCM- |
|
DCA-LM1-000-GLF-10.75-B |
2000 |
78.74 |
10.75 |
0.42 |
L1, M1 |
|
DCA-LM1-000-GLF-10.75-W |
2000 |
78.74 |
10.75 |
0.42 |
L1, M1 |
|
DCA-LM1-000-GLF-15.75-B |
2000 |
78.74 |
15.75 |
0.62 |
L1, M1 |
|
DCA-LM1-000-GLF-15.75-W |
2000 |
78.74 |
15.75 |
0.62 |
L1, M1 |
|
DCA-LMH1-000-GLF-20.75-B |
2000 |
78.74 |
20.75 |
0.82 |
L1, M1, H1 |
|
DCA-LMH1-000-GLF-20.75-W |
2000 |
78.74 |
20.75 |
0.82 |
L1, M1, H1 |
|
DCA-LMH1-000-GLF-26.75-B |
2000 |
78.74 |
26.75 |
1.05 |
L1, M1, H1 |
|
DCA-LMH1-000-GLF-26.75-W |
2000 |
78.74 |
26.75 |
1.05 |
L1, M1, H1 |
|
DCA-LMH1-000-GLF-35.75-B |
2000 |
78.74 |
35.75 |
1.41 |
L1, M1, H1 |
|
DCA-LMH1-000-GLF-35.75-W |
2000 |
78.74 |
35.75 |
1.41 |
L1, M1, H1 |
|
|
|
DCA-GLFA - Guide, Lateral, Fixed, Aluminum
Fixed
Lateral Guides mount to the "T" slot on the side of the chassis. They
are used to contain the product on the conveyor but do not provide
accurate lateral product positioning. They can be added after a
conveyor is assembled and mount with a guide clamp
|
Product |
Length |
Height |
Use With Conveyor |
mm |
in |
mm |
in |
DCM- |
|
DCA-H1-000-GLF-65-A |
2000 |
78.74 |
65 |
2.56 |
H1 |
|
|
|
DCA-GLFP - Guide, Pallet, Fixed, Plastic
Pallet
Guides are required for any system conveying pallets. They provide
lateral positioning and guidance of the pallets. They mount in the slot
on top of the chassis and can be added after conveyor assembly.
|
|
|
DCA-GLH - Guide, Lateral, Holder, Adjustable
The
Lateral Guide Holder allows for both height and lateral guide
placement. Adjustable positioning allows for quick and easy change over
for running various sized product on the same conveyor.
 
|
Product |
Vertical Adjustment |
Horizontal Adjustment |
Use With Conveyor |
mm |
in |
mm |
in |
DCM- |
|
DCA-H1-000-GLH |
45 |
1.77 |
45 |
1.77 |
H1 |
|
DCA-LM1-000-GLH |
35 |
1.38 |
45 |
1.77 |
L1, M1 |
|
|
|
DCA-MBA - Mounting Bracket, Right Angle
Right Angle Mounting Brackets can be used to mount the conveyor chassis to other equipment.
|
|
|
DCA-MSC - Mounting Slot Cover
The Mounting Slot Cover can be inserted into the ""T"" slot for applications like clean-room and food industry.
|
|
|
DCA-MSN - Mounting Slot Nut
Mounting
Slot Nuts can be inserted directly into the ""T"" slot of the chassis.
This makes it easy to add them after a conveyor has been assembled
|
|
|
DCA-MSQ - Mounting Slot Square Nut
Mounting Slot Square Nuts can be added to the chassis ""T"" slot prior to assembly to mount items to the side of the chassis.
|
|
|
DCA-MST - Mounting Slot T-Screw
Mounting
"T" Screws can be inserted into the ""T"" slot in the side of the
chassis. They can be inserted in the ""T"" slot even after the conveyor
has been assembled.
|
|
|
DCA-PSH - Positioner, Stop Horizontal
The
Horizontal Position Stopper is used to stop product on the conveyor
belt and allows for queuing of product. It can be placed anywhere along
the conveyor and can also be adjusted laterally.
|
Product |
Adjustment Range |
Stopping Force |
Use With Conveyor |
mm |
in |
N |
lb |
DCM- |
|
DCK-LM1-000-PSH |
32 |
1.26 |
210 |
46.2 |
L1, M1 |
|
|
|
DCK-BSP - Belt Support Kit
The Belt Support Kit provides support to belts to help reduce sag on the return length of the belt.
|
|
|
DCK-BT - Belt Tensioner
The Belt Tensioner can be used in long conveyor applications to accommodate belt stretch associated with longer belts.
|
|
|
|
|
 |
