70626 - Hydraulic Edge Clamp

StrongHold edge clamps perform three functions: locating the workpiece, clamping horizontally against secondary locators, and clamping vertically against the primary locating surface.

1. 3,500 PSIG max. operating pressure
2. Positive spring return and replaceable grippers
3. Powered using ship air with an air/hydraulic booster

7011-5 - Hydraulic Power Clamp

The power clamps (double action) are used where a high clamping force is needed combined with small clamp dimensions. The cylinder body can be turned 90� in relation to the clamp.

1. max. clamping force 1250 daN (2810 ib)
2. max. operating pressure 250 bar (3625 psi)

7012-2 - Hydraulic Power Clamp

The power clamps (singel action) are used where a high clamping force is needed combined with small clamp dimensions. The cylinder body can be turned 90� in relation to the clamp.

1. max. clamping force 1250 daN (2810 lb)
2. max. operating pressure 250 bar (3625 psi)

70622-D - Hydraulic Retracing Clamp

Hydraulic retracing clamps are designed for clamping on machines and fixtures, for holding-down plates or to work as latch clamps.

1. max. clamping force 1625 daN (3653 lb)
2. max. clamping stroke 9mm (0.35 in)
3. max. operating pressure 250 bar (3625 psi)

733E - Hydraulic Hold Down Clamp

Hydraulic hold down clamps are mainly used where workpiece clamping "from the top" is difficult or impossible. Its small design is an advantage where space is limited.

1. max. clamping force 1850 daN (4158 lb)
2. max. operation pressure 500 bar (7250 psi)