020 - Thru-Hole Hydraulic Rams

None

090 - SELECT Hydraulic Block Cylinder

SELECT hydraulic block cylinders are designed for clamping, positioning, locating, punching, pressing, riveting and bending applications.

1. Single and double acting versions are available
2. A range of sizes with maximum forces from 2220 to 8800 lbs.
3. SAE fluid ports are standard
4. Stainless steel plungers

70250/70260 - Hydraulic Block Cylinder

These hydraulic block cylinders are designed for clamping, positioning, locating, punching, pressing, riveting and bending applications.

1. 3000 PSI maximum operating pressure
2. Force at 3,000 PSIG Extend = 1,325 lbs
3. Force at 3,000 PSIG Retract = 763 lbs
4. Stroke = .50 (70250) and 1.00 (70260)

705 - Hydraulic Hollow Piston Cylinder - Single Action

Versatile applicable - can be used as a pushing or a pulling cylinder.

1. max. operation pressure 350 bar (5075 psi)

721D - Hydraulic Screw-In Cylinder - Double Action

These cylinders can be used in applications where precise an rapid stroke speeds are requiered for the forward and the backstroke or when retraction forces are needed.

1. piston diameter 25, 32, 40, 50 mm
2. max. operation pressure 350 bar (5075 psi)

721E - Hydraulic Screw-In Cylinder - Single Action

Hydraulic srew-in cylinder are essential elements in machine and tool manufacture. They can used in clamping fixtures for positioning, clamping and gripping of workpieces.

1. piston diameter 8-50 mm
2. max. operation pressure 250-350 bar (3625-5075 psi)

722D - Hydraulic Screw-In Cylinder - Double Action

These cylinders are particularly suited for applications requiring frequent cycles and rapid stroke speeds. Mounting holes facilitate quick and easy installation in horizontal and vertical position

1. piston diameter 16-50 mm
2. max. operation pressure 500 bar (7250 psi)

722E - Hydraulic Screw-In Cylinder - Single Action

These cylinders are particularly suited for applications requiring frequent cycles and rapid stroke speeds. Mounting holes facilitate quick and easy installation in horizontal and vertical position

1. piston diameter 16-50 mm
2. amx. operation pressure 500 bar (7250 psi)

723D - Hydraulic Hollow Piston Cylinder - Double Action

Versatile applicable - can be used as a pushing or a pulling cylinder. Mounting holes facilitate quick and easy installation.

1. max. operating pressure 350 bar (5075 psi)

723E - Hydraulic Hollow Piston Cylinder - Single Action

Versatile applicable - can be used as a pushing or a pulling cylinder. Mounting holes facilitate quick and easy installation.

1. max. operating pressure 350 bar (5075 psi)

725D - Hydraulic Short Stroke Cylinder - Double Action

These double action hydraulic short-stroke cylinders are primarily used for operatiing double action hydraulic punching, notching and cutting units.
Adequate mounting flanges available on request.

1. piston diameter 35, 50, 63, 80 mm
2. max. stroke 15-17 mm
3. max. operation pressure 350 bar (5000 psi)

741 - Hydraulic Hollow Piston Cylinder - Double Action

Versatile applicable - can be used as a pushing or a pulling cylinder.
The hydraulic return action allows short stroke times and high retraction forces, i.e. clamping forces in the reverse stroke direction.

1. max. stroke 10-24 mm
2. max. operating pressure 350 bar (5075 psi)