REES 00580-032, 1.00 Inch Double Plastic Plunger   ree rees electrical controls logo

REES 00580-032, 1.00 Inch Double Plastic Plunger

Back to Store  / REES

Features/Applications

The following switch is a hand operated, control circuit device, rated ‘Heavy Duty’ normally for use with electromagnetic equipment. The black cover, painted with a dry powder paint, is made from die-cast zinc. The red and green plastic plungers are made from DuPont Delrin 100ST for improved impact resistance and are solid colors throughout.  

  • Gold plated contacts eliminate high resistance tarnishing
  • Nema 12/13, IP 65

Each captive terminal will accept (2) #14 AWG stranded wires. Each switch is supplied with all mounting hardware and a solid neoprene rubber gasket which provides an oil tight seal upon installation. The mechanical life of this device is 500,000 operations.

This switch can be found on a variety of machines such as: punch presses and press brakes as “START” and “STOP” or “FORWARD” and “REVERSE” buttons and with material handling equipment as “UP” and “DOWN” or “RAISE” and “LOWER” controls. Its rugged construction and long term reliability make this switch extremely well suited to function within various industrial/commercial environments.

Electrical Ratings

“HEAVY DUTY – A600 / N300”
Listed under UL 508 – File # E 58589
Certified under CSA C22.2 – File # LR 3648
CE Compliant IEC/EN 60947-5-1
Third party certified under DEMKO Certificate # D-01496-M1

Environmental Temperature Range

Operating: +32oF to +131oF (0oC to +55oC)
Storage: -40oF to +185oF (-40oC to +85oC)
Note: Operating temperatures at 0oC are based on the absence of freezing moisture and liquids.

     
110-120 acvolts 6.0 amp. 60.0 amp.
220-240 aca 3.0 amp. 30.0 amp.
440-480 aca 1.5 amp. 15.0 amp.
550-600 aca 1.2 amp. 12.0 amp.
115-125 dcb 2.2 amp. -----
230-250 dcb 1.1 amp. -----

 Power factor 0.35 or less

 Inductive loads as specified in Section 125 of Industrial

   Control Devices, Controllers and Assemblies, ANSI /

   NEMA ICS 2-1988

 

Specifications  
1.00" Plunger Color Green

1.00" Plunger Color

Red

Cover Color

Black

Contact Arrangement

#04 NO + NC
Positive Break,
Slow-Make/Slow-Break

Contact Type

Slow-Make / Slow-Break

Operating Type

  Maintained

Approx. Shipping Weight

1.35 LB

 

More Images

Dimensional Drawing

Contact Arrangement

Back View

 Warning - Danger(PDF, 77KB)

 Glossary of Common Terms(PDF, 234KB)

 Double Plunger Introduction(PDF, 371KB)

 Rating Codes(PDF, 28KB)

Installation Instruction Sheet(PDF, 301KB)