REES 02140-032, 1.00 Inch Double Plastic Plunger
Features/Applications
The following switch is a hand operated, control circuit device, rated ‘Heavy Duty’ normally for use with electromagnetic equipment. The black cover, painted with a dry powder paint, is made from die-cast zinc. The red and green plastic plungers are made from DuPont Delrin 100ST Acetal for improved impact resistance and are solid colors throughout.
- Gold plated contacts eliminate high resistance tarnishing
- Nema 12/13, IP 65
Each captive terminal will accept (2) #14 AWG stranded wires. Each switch is supplied with all mounting hardware and a solid neoprene rubber gasket which provides an oil tight seal upon installation. The mechanical life of this device is 500,000 operations.
Electrical Ratings
“HEAVY DUTY – A600 / N300”
Listed under UL 508 – File # E 58589
Certified under CSA C22.2 – File # LR 3648
CE Compliant IEC/EN 60947-5-1
Third party certified under DEMKO Certificate # D-01496-M1
Environmental Temperature Range
Operating: +32oF to +131oF (0oC to +55oC)
Storage: -40oF to +185oF (-40oC to +85oC)
Note: Operating temperatures at 0oC are based on the absence of freezing moisture and liquids.
| 110-120 aca volts | 6.0 amp. | 60.0 amp. |
| 220-240 aca | 3.0 amp. | 30.0 amp. |
| 440-480 aca | 1.5 amp. | 15.0 amp. |
| 550-600 aca | 1.2 amp. | 12.0 amp. |
| 115-125 dcb | 2.2 amp. | ----- |
| 230-250 dcb | 1.1 amp. | ----- |
a Power factor 0.35 or less
b Inductive loads as specified in Section 125 of Industrial
Control Devices, Controllers and Assemblies, ANSI /
NEMA ICS 2-1988
|
|||||||||||||||||||||||||
|
|||||||||||||||||||||||||
More Images
Warning - Danger(PDF, 77KB)
Glossary of Common Terms(PDF, 234KB)
Double Plunger Introduction(PDF, 371KB)
Rating Codes(PDF, 28KB)
Installation Instruction Sheet(PDF, 301KB)
